Live from the blog
Speak to an expert :
Call Ian on 01733 405104
Call Rob on 01733 405103
Rainwater Harvesting is a simple concept that to some can seem quite...
→ Read More
Water provider incentives- save up to £722 per plot.
What is it?
Anglian Water and Severn Trent have launched schemes to incentivise water efficient new homes. The...
→ Read More
RAIN ACTIV® INSTALLATION CASE STUDY TRURO, CORNWALL
Provided combined storm attenuation and rainwater harvesting.
Reduced peak stormwater discharge rate to...
→ Read More
2600 litre Complete Rainwater Harvesting garden system above ground. The Balmoral surface mounted rainwater storage system is supplied as a kit for horticultural, agricultural or garden use.
Why buy this system?
The illustration above shows a typical installation with incoming water filtered by the Rainus filter and the excess water collected by the overflow syphon and drained back to a downpipe. The pump will deliver the stored water at pressure to irrigation units, ponds or larger tanks. This is particularly applicable where the delivery point is above the water level of the tank - e.g. garden with incline.
More about the tank
Balmoral, the trusted British brand, is a company that designs and manufactures rainwater storage tanks in the UK using the highly efficient rotational moulding process.
Rotational moulding is a process ideally suited to producing hollow plastic products. By using additional post-moulding operations, complex components can be produced enabling the process to compete effectively with other moulding and extrusion practices. Rotational moulding differs from other processing methods in that the heating, melting, shaping, and cooling stages all occur after the polymer is placed in the mould, therefore no external pressure is applied during forming. This provides the following advantages:
The tanks have been rigorously tested to comply with the requirements of the United Kingdom Water Byelaws and Regulations when correctly installed.
About the pump
Rainwater Pump - HydroForce 800w submersible power pump. All the benefits of the new reliable HydroForce with a built in pressure switch and dry run protection.
The all new HydroForce pump now has even more failsafe features:
Rainwaterharvesting.co.uk has collated the components that are needed to divert water to the tank, filter out debris and retrieve it for uses from power washing to irrigation.
What comes with this kit?
|Components list for Balmoral Tank 2600 litre GAK1|
|Product Code||Product Description|
|NPW2700||Tank 2600 litres|
|3P-4000260||Uno Overflow Syphon|
|RWH-HYD03FL||HydroForce 800w Submersible pump with dry run protection|
|3P-2000700||Rainus Downpipe Filter|
|Delivery||Haulage, UK mainland included (Highlands & Islands on request)|
|BWST-V2600-GAK1||Complete above ground kit for garden use|
LIFTING EQUIPMENT REQUIRED ON SITE FOR DELIVERY OF THIS ITEM. Since mid 2011 delivery has been by 55 foot articulated lorry. Please ensure your approach roads are straight and wide. Thank you.
No customer reviews for the moment.