Live from the blog
I’m sure that the Environment Agency and anyone to do with Climate Change have been flooded (excuse the pun) with questions over the last few...
→ Read More
Speak to an expert :
Call Ian on 01733 405104
Call Rob on 01733 405103
Rainwater Harvesting is a simple concept that to some can seem quite...
→ Read More
Water provider incentives- save up to £722 per plot.
What is it?
Anglian Water and Severn Trent have launched schemes to incentivise water efficient new homes. The...
→ Read More
F-Line Flat Tank 3000 litre shallow dig underground tank with accessory options.
Why buy this tank?
The F-line flat tank can be installed into much higher water tables than a standard round tank. If you don't know what your water table will be like in the winter, you're safer to install a flat tank. The F-Line tanks are flat and the installation depth is 60% less than other rainwater tanks. The excavation can be up to 70% less, meaning little earth excavation, easy handling and less cost for you! The small excavation pit is easily filled in and your garden will look just like it did before. The pics below show a 1500 tank as an example to illustrate the work required, obviously 3000 - 7000 litre tanks have different dimensions but they are still 'shallow dig'.
|Overall Height*||1015 - 1415||1015 - 1415||1350 - 1750||1415 - 1815|
Ground to Invert**
|335 - 735||335 - 735||335 - 735||330 - 730|
|Invert to Outlet||162||162||162||162|
|Overall Height*||1115 - 1515||1115 - 1515||1450 - 1850||1515 - 1915|
*Overall height allows for 100mm compacted aggregate
**Using a VS60 (635mm Shaft)
The overall height difference above is because up to 400mm can be cut off the 635mm shaft on site so as to achieve your exact invert level.
The F-Line Tank comes with the option of an In Tank Filtration pack. The set has all the components needed to filter the rainwater as it enters your tank and drain any surplus to your overflow.
The fine filter filters dirt particles, before they reach the tank. The filter cartridge can simply be taken out for maintenance and can be easily cleaned.
All the parts are pre-mounted ready for connection. To buy this option see the drop down menus below or call 01733 405111.
|Pure Garden irrigation (rough guide)||Connected roof surface area>||Tank size in litre|
|Up to approx. 100m2 garden area||min 20m2||1000-1500|
|Up to approx. 300m2 garden area||min 40 m2||2500-3000|
|Up to approx. 500m2 garden area||min 70m2||3000-5000|
|Up to approx. 800m2 garden area||min 90m2||5000-7500|
|Up to approx. 1000m2 garden area||min 100m2||7500-10000|
Choose your optional extras using the drop down menus.
You will need a Walk-On Lid and 235mm shaft as a minimum as you don't want anyone falling in the tank - the alternatives parts are for deeper excavation or vehicle strength lid and shaft for a drive...you can always call 01733 405111 for details