Rainwater storage tank or big water butt for the garden or allotment 800 Litres capacity. Designed to fit close against your wall. The tank features brass connection points and a brass tap. Uniquely, the tank has a 200mm inspection hatch on the top that can be opened to lower in a submersible pump or to power wash out the tank. Similar models do not have this hatch.
There are three take off points, 2 x 25mm (1″) at the base , and a 3/4″ tap outlet, 30cm above the base.The tank comes with a brass tap and garden hose connection.
These tanks can be interlinked using the RWH Tank to Tank Connection Set.
Available in Green, Yellow Sandstone effect, Marbled Green and Black.
Dimensions: 820mm x 630mm x 1790mm
Weight 40 kilos.
The tank polymers are UV stabilized and have a 10 year warranty from manufacturing defects.
Add a downpipe Filter Collector that can be fitted directly to the tank side (depends on location of down pipe) using the seal supplied or with a short pipe and filter to tank connector kit.
DELIVERY OF RAINWATER HARVESTING SYSTEMS
We try where possible to deliver using our own vehicle but in the event of either too greater distance or a booked calendar we may have to deliver using a third party haulier. The delivery is kerbside and the offloading is the responsibility of the customer. We suggest to organise the delivery to arrive whilst you have the digger on site to assist with offload. Our shallow dig tanks can be lifted off the vehicles by hand providing there are enough bodies on site.
The systems are held in stock at our Peterborough warehouse and we normally operate on a 7-10 delivery from receipt of order.
If you have any problems to accept kerbside deliveries or access issues please contact a member of our team on 01733 405111.