NEED HELP? Call 01733 405 111 Option 1

Live from the blog

Flushing the toilet with rainwater
Flushing the toilet with rainwater

What thought do you give to flushing the toilet? An odd question, granted, because many people would probably answer, “not a lot, why?”. Which is understandable, after all,...

→ Read More

Public told to cut water use amid surge in lockdown demand
Public told to cut water use amid surge in lockdown demand

Water companies are urging people to use water more carefully during the coronavirus lockdown. They are asking people to avoid hoses and sprinklers, and not to fill...

→ Read More

Who's responsible?
Who's responsible?

Who’s responsible? I’m sure that the Environment Agency and anyone to do with Climate Change have been flooded (excuse the pun) with questions over the last few...

→ Read More

Follow us on Facebook

3P Rainus Filter

On sale

3P Rainus Filter

WAS £93.89 - NOW £84.50

Rainwater Filter for installation in the lower section of the downpipe.

More details...

On sale

£ 84.50

Tax excluded

Rainwater Filter for installation in the lower section of the downpipe. It is easy to monitor due to its installation position in the downpipe. No need to lift heavy lids or to climb down into storage tanks, as required when filters are installed underground. The downpipe filter where the cleaned rainwater flows out down the filter pipe.

The 3P Rainus is also ideal for re-fitting of equipments which are not disposing of a filter. Simple installation and maintenance depending on contamination. To clean, slide the filter unit out, and brush off any dirt.

Connection capacity for roof areas up to 70 m²

Max. Flow Rate Sieve insert aprox. 0,6 l/sec = aprox. 2 m³ cleaned water per hour.

Installation in standpipes at Ø 80 or 110 mm. The upper connection can accept metal downpipes of 80 and 100.

The cleaned water can be used in washing machines, toilet flushing and garden watering, in homes, in commerce, in public buildings and in industry.

How it works

1. The falling rainwater´s energy is attenuated by baffles in the upper filter housing.

2. Rainwater is then calmed in a small sump.

3. Water then weirs over the sump lip, and is distributed evenly across the primary cascade, the first cleaning step.

4. The primary cascade filters out any large or coarse particles, such as leaves and moss.

5. Below and behind the primary cascade is a finer secondary filter.

6. Fine and coarse particles are ejected from the front of the filter.

7. Cleaned rainwater flows out of the filter outlet to a storage tank or to the point of use or disposal system.

Technical Data

Installation in standpipes at Ø 80 or 110 mm. The upper connection can accept metal downpipes of 80 and 100.

The filter is aprox. 50,5 cm high and 17 cm wide. It needs very little space behind it and altogether it is just 22 cm deep.

Housing material: ABS

Filter sieve: Stainless steel 1.403

Mesh size 0,7 x 1,7 mm

Weight: : 2,0 kg

Not to be used in conjunction with any other offer

3 other products in the same category :