Live from the blog
Speak to an expert :
Call Ian on 01733 405104
Call Rob on 01733 405103
Rainwater Harvesting is a simple concept that to some can seem quite...
→ Read More
Water provider incentives- save up to £722 per plot.
What is it?
Anglian Water and Severn Trent have launched schemes to incentivise water efficient new homes. The...
→ Read More
RAIN ACTIV® INSTALLATION CASE STUDY TRURO, CORNWALL
Provided combined storm attenuation and rainwater harvesting.
Reduced peak stormwater discharge rate to...
→ Read More
Our multi award winning low energy system, with the popular shallow dig F-Line tank for easy and cost effective installation.
Our Verdict: We believe this is the best, most economical Rainwater Harvesting system money can buy, coupled with the best tank.
Half your water bill with running costs less than 1p per person per day.
The Rain Director® pumps through a control unit, up to a "smart header tank" usually situated in a loft space. Inside the header tank are two level sensors, upper and lower. The system fills the header tank to the upper sensor then does not use the pump again until virtually all of the water is used and the lower sensor is reached. This "batch filling" process means the pump cycles 1-2 times per day, in comparison to every time a toilet is flushed with traditional systems.
Coupled with the large reduction in energy and pump wear, the Rain Director® has numerous benefits in comparison to others on the market.
Our F-line flat tank has become a customer favourite due to its simple and cost effective install. Up to 70% less excavation than an equivalent sized "deep dig" tank. Great for high water table areas or heavy clay when deep excavations cause unnecessary hassle and costs. All without the need for a costly concrete backfill.
Remember, these tanks are exceptionally strong: with an optional upgrade to vehicle loading shaft and steel lid for driveways etc.
At Rainwater Harvesting Ltd we provide a'' Complete Solution'' supplying everything specific to Rainwater Harvesting.* There are no hidden extras. We manufacture systems and pumps etc ourselves and hold everything in stock. Delivery is usually within 5 to 7 working days of ordering.
We provide a full time, fully trained technical help desk to answer any questions that the client, builders or plumbers may have before, during and after the install.
F-Line Tanks have a 25 year manufacturers warranty.
All other parts have a 2 year warranty.
|Overall Height*||1015 - 1415||1015 - 1415||1350 - 1750||1415 - 1815|
Ground to Invert**
|335 - 735||335 - 735||335 - 735||330 - 730|
|Invert to Outlet||162||162||162||162|
|Overall Height*||1115 - 1515||1115 - 1515||1450 - 1850||1515 - 1915|
*Overall height allows for 100mm compacted aggregate
**Using a VS60 (635mm Shaft)
The overall height difference above is because up to 400mm can be cut off the 635mm shaft on site so as to achieve your exact invert level.
* Please note that the pump supplied with this system has a minimum operational throughput of 10 L / minute. If the flow drops below this then the pump will potentially hunt or go into dry run protection mode. If you are using for example a drip feed irrigation system or low flow devices with this pump then we recommend installing a pressure vessel.