Pump - 1100w Evolution X-AJE 80 from SteelPumps Centrifugal pressure-sensitive submersible pump from Italian manufacturer SteelPumps. Stainless steel throughout.
X-AJE80P
NEED HELP?
Call 01733 405 111 Option 1
Live from the blog
NEED HELP?
Speak to an expert :
Call Ian on 01733 405104
or
Call Rob on 01733 405103
Rainwater Harvesting is a simple concept that to some can seem quite...
→ Read More
Water provider incentives- save up to £722 per plot.
What is it?
Anglian Water and Severn Trent have launched schemes to incentivise water efficient new homes. The...
→ Read More
RAIN ACTIV® INSTALLATION CASE STUDY TRURO, CORNWALL
Provided combined storm attenuation and rainwater harvesting.
Reduced peak stormwater discharge rate to...
→ Read More
Pump - 1100w Evolution X-AJE 80 from SteelPumps Centrifugal pressure-sensitive submersible pump from Italian manufacturer SteelPumps. Stainless steel throughout.
X-AJE80P
These automatic pumps from SteelPumps are equipped with an electronic micro-processor board, flow sensor with cobalt Samario magnets, a pressure gauge and built-in check valve. As soon as the pressure in the output pipe builds up the pump shuts off, probably quicker than any other pump. Ideal for pumping into the house against the stop cocks of the toilet cistern and washing machine, but also in the garden when you might be opening and closing the spray head of your hosepipe.
Like all submersible pumps, prime it before first use by removing the small cap and pouring water (about 5 litres) in until full.
Sourced specially by RainWater Harvesting Ltd in response to demand from our clients.
2400 litres per hour and a head of 45 metres max. Length 477 mm width 200 mm height 226 mm. Protection class IP68.
| Pressure sensitive | Yes |
| Flow rate (litres per hour) | 2,400 |
| Head height to which it can be pumped (metres) | 45 |
| Suction depth | 5 |
| Inlet height off ground (mm) | approx 50mm |
No customer reviews for the moment.
