Float switch or floating switch for the control of pumps and controllers. The floating switch can be wired for either auto filling or auto emptying.
RWH-FL15
NEED HELP?
Call 01733 405 111 Option 1
Live from the blog
Water companies are urging people to use water more carefully during the coronavirus lockdown.
They are asking people to avoid hoses and sprinklers, and not to fill...
→ Read More
Who’s responsible?
I’m sure that the Environment Agency and anyone to do with Climate Change have been flooded (excuse the pun) with questions over the last few...
→ Read More
NEED HELP?
Speak to an expert :
Call Ian on 01733 405104
or
Call Rob on 01733 405103
Rainwater Harvesting is a simple concept that to some can seem quite...
→ Read More
Float switch or floating switch for the control of pumps and controllers. The floating switch can be wired for either auto filling or auto emptying.
RWH-FL15
Float Switch for the control of pumps and controllers. The float switch comes with 15 metres of cable.
The float switch can be wired either to turn a pump on or off, i.e. either auto filling or auto emptying, and can be used in any water application including rainwater storage tanks, header tanks, springs, wells, bore holes and scavenge pits. Correct connection of a float switch does require some electrical knowledge and expertise (see instructions below).
TECHNICAL DATA |
|
| Rated voltage | 250V 15A, non-inductive. 250V 10A, inductive. 1.3 HP |
| Frequency | 50-60 Hz |
| Maximum operating temperature | 70˚C |
| Protection Grade | IP68 hermetically-sealed |
Note: Colours do vary. Counterweight not supplied
